Automatic multi-color pad production line 
 ① point glue color 
 Automatically Dripping compiled a good drop of a variety of colors according to the product design process. When the mold to a predetermined position, the system will automatically recognize different molds, pre-select the corresponding program is accurate drops of a different color pigment in the mold 
 ② preliminary plasticizing 
 When dispensing is complete, the system automatically run the mold into the tunnel furnace preliminary plasticizing 
 ③ cold model 
 Plasticization is complete automatically into the cooling zone, and pre-screening work. Mold down to the appropriate temperature automatically when you enter the end of material filling process 
 ④ the end of the material filling 
 Material filling the end of the fully automatic process, different molds of the desired gel content, the preparation of the glue gun, walking track, when the mold into the station, the system will automatically recognize the different mold, and select the corresponding stored trajectory expected at the end of filling . The weight of the same mold each filling material is very accurate 
 ⑤ bake molding 
 Expected at the end filling is completed, it automatically into the forming tunnel oven and bake molding. According to differences in product and mold, the time required is not the same. Adjusted according to actual conditions and cooling 
 The cooling and sizing of the cooling water, mold automatically flows through the cold water tank, a sharp decline in the mold temperature, the product immediately stereotypes. 
 ⑥ cooling stereotypes 
 The cooling and sizing of the cooling water, mold automatically flows through the cold water tank, a sharp decline in the mold temperature, the product immediately stereotypes. 
 ⑦ mold release of seized goods 
 Completion of the mold cooling to the mold release of seized goods, then the mold into the dispensing color station of the production cycle.